Jump to content


Photo
- - - - -

Bumpkey for this???


  • Please log in to reply
13 replies to this topic

#1 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 11 December 2007 - 11:17 PM

does anyone know what type of Bumpkey would work on this lock? I would greatly apperciate it.

Attached Files



#2 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 04 June 2008 - 08:39 AM

bump...........

#3 WOT

WOT

    Member

  • Members
  • PipPipPip
  • 53 posts

Posted 04 June 2008 - 03:35 PM

No clue. You need to post a clear picture of the keyhole before I can even guess.

#4 theopratr

theopratr

    The Wise One

  • Members
  • 454 posts

Posted 05 June 2008 - 12:50 PM

You need to post a clear picture of the keyway and/or key in question. Generic locks like that could take any one of a number of different keys.

#5 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 11 June 2008 - 11:53 PM

sorry it took so long to get back with ya'll but had to find the lock. So tell me what ya'll think

Attached Files



#6 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 11 June 2008 - 11:55 PM

if there is anything else u need please let me know.

#7 snooKa

snooKa

    Member

  • Members
  • PipPipPip
  • 47 posts

Posted 12 June 2008 - 03:11 PM

try a masterlock bump key or padlock on that, tell us your results
Official BumpKey Supporter

#8 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 12 June 2008 - 07:45 PM

none of them fit....its like its the opposite of a master key with the groove on the other side

#9 snooKa

snooKa

    Member

  • Members
  • PipPipPip
  • 47 posts

Posted 12 June 2008 - 08:50 PM

hm you dont have the original key for it?
Official BumpKey Supporter

#10 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 18 June 2008 - 09:23 PM

Alright, I finally found the key for this lock and here it is. Just a heads up, none of the "m" series keys fit this key path. th M-11 is the closest, but it wont fit. Any suggestions would be highly recieved.:bow::bow:

Attached Files



#11 chorbats

chorbats

    Member

  • Members
  • PipPipPip
  • 57 posts

Posted 29 June 2008 - 11:36 AM

any luck guys? Ive notifed that the message board has calmed down abit.

#12 Customer Support

Customer Support

    Administrator

  • Administrators
  • 753 posts

Posted 02 July 2008 - 10:07 PM

chorbats..

Yes, it has died down a bit and we're partly to blame!! The good news is that we're 99% caught up now with orders.

That's a another story...

Hrm. The 'china' key strikes again! At first glance it does look like a M1 key.
The easiest way to identify the key would be to view it from the tip looking down so you can see the key way. Take a look here: http://www.bumpkey.u...ut-bump-key.jpg you'll notice the key way at the bottom of the image. The way to identify it, for us, would be to see what yours looks like and then compare it with keys in our key books.

BUT - it's rather hard for us to actually see the key, so you might be able to browse around on some other sites and see the key ways for different keys...

James K. - Lead Support
For Order specific questions please use the 'contact us' link at the top of our store.


#13 theopratr

theopratr

    The Wise One

  • Members
  • 454 posts

Posted 03 July 2008 - 11:46 AM

Your analysis of it being an M1 with the groove on the other side may be largely correct. ILCO does make an M1 that is an exact mirror image of the original that has no common name, but a similar ILCO designation: the M1 is the 1092, and the reverse of that is an 1092R. You'd really only be able to get this blank off the internet or from a locksmith... your local hardware store isn't going to have it.

You might also try the M16 and/or the M5.

When I ran into this problem, I just bought another example and turned both the the included keys into bump keys.

Best of luck!

#14 locksmith673

locksmith673

    Member

  • Members
  • PipPipPip
  • 37 posts

Posted 06 December 2008 - 10:42 AM

my grand father has hundreds of locks with key holes that are weird as shit.. you may just have a old lock that realy cant be bumped... be glade you own that lock and its not what you are trying to get into....