Jump to content


Photo
- - - - -

6-pin SC-20 bump key with a 5-pin lock?


  • Please log in to reply
1 reply to this topic

#1 ahazaq2

ahazaq2

    Junior Member

  • Members
  • Pip
  • 7 posts

Posted 07 November 2007 - 10:38 PM

I bought an SC-20 bump key from the bumpkey.us store, and so far I haven't got it to work.


What I'm wondering is, since the SC-20 is 6 pins, and the door I'm trying to bump is 5 pins, will it still work?



They're all schlage keys.


And the SC-20 fits inside perfectly.

#2 theopratr

theopratr

    The Wise One

  • Members
  • 454 posts

Posted 08 November 2007 - 06:16 PM

It will still work, it's just a bit sloppier - try pulling the key out two pins instead of one, that sometimes helps deliver the energy to where it needs to be.

The SC-20 is a bit of an advanced move, as there is some wobble to the key due to it's not being tight fitting in the lock, and thus I would recommend becoming proficient at bumping with the specific key for the lock before attempting to use a master-keyway bump key. Although it will work for everything, it's not always quite as easy.