Jump to content


Photo
- - - - -

Lock with deep cuts,possible to bump ?


  • Please log in to reply
4 replies to this topic

#1 lapo

lapo

    Junior Member

  • Members
  • PipPip
  • 16 posts

Posted 20 October 2007 - 10:46 AM

Hi, I've bought a lock, that has 2 deep cuts on key (they're probably 9-pin, or 8 ?)
I've tried to make a bumpkey and bump it. I've almost done it, lock turns little, but then it's stuck. If I shake it in that position I can hear pins jumping up and down. But probably those two 9-pins are problem, because they're too deep and they should be still when bumping.
Here is a picture of original key.
Is it possible to bump ? :confused:

Attached Files

  • Attached File  t1.JPG   29.01KB   16 downloads


#2 Customer Support

Customer Support

    Administrator

  • Administrators
  • 753 posts

Posted 20 October 2007 - 10:58 AM

Most anything is possible to bump.

You might just need to cut the bump key a bit deeper that what you already have. Do you have a picture of the bump key? That might help a bit, too.

James K. - Lead Support
For Order specific questions please use the 'contact us' link at the top of our store.


#3 lapo

lapo

    Junior Member

  • Members
  • PipPip
  • 16 posts

Posted 20 October 2007 - 11:05 AM

Here it is.
Now it's little modified, I've tried to lower that last peak (where the 9-pin is).
Probably filed it too much?
Are those two cuts on original key (first and last cut) 9-cuts ?
Lock is Titan K1.

Thanks

Attached Files

  • Attached File  t2.JPG   48.38KB   15 downloads


#4 lapo

lapo

    Junior Member

  • Members
  • PipPip
  • 16 posts

Posted 20 October 2007 - 11:13 AM

And this is position of pins with bumpkey inside. probably that last pin on the left is to high ?

Attached Files

  • Attached File  t3.JPG   19.24KB   13 downloads


#5 Customer Support

Customer Support

    Administrator

  • Administrators
  • 753 posts

Posted 21 October 2007 - 07:38 PM

Since you've got the deep cuts on the original, it's not going to hurt going a bit deeper on the bump key -- the pins NEED to be able to 'hang' freely.

James K. - Lead Support
For Order specific questions please use the 'contact us' link at the top of our store.