Jump to content


Photo
- - - - -

Master commerical padlock with 21 on the bottom


  • Please log in to reply
7 replies to this topic

#1 tdives

tdives

    Junior Member

  • Members
  • Pip
  • 2 posts

Posted 19 April 2007 - 04:53 PM

I'm a looking for a bump key for a master lock with # 21 on the bottom any suggestions?:bow:

#2 BLK

BLK

    Pure Genius

  • Members
  • 321 posts

Posted 19 April 2007 - 06:50 PM

Post a picture of the original key. Or post a picture of the lock and the key way on the lock.
Bump it to the next level.

#3 Customer Support

Customer Support

    Administrator

  • Administrators
  • 753 posts

Posted 19 April 2007 - 07:13 PM

I'm a looking for a bump key for a master lock with # 21 on the bottom any suggestions?:bow:


Welcome to the forum!

I posted this in another thread. I found it by ::cough:: ::cough:: searching.

If you're ever in doubt of which key will fit what master lock, head to their web site: www.masterlock.com and take a peek at which key the lock uses.


http://www.masterloc...21&template=app

Looks to be your key.

Heck, to be sure just upload the pic of your blank as blk suggested. You can use www.tinypic.com for image uploading.

James K. - Lead Support
For Order specific questions please use the 'contact us' link at the top of our store.


#4 BLK

BLK

    Pure Genius

  • Members
  • 321 posts

Posted 19 April 2007 - 07:49 PM

http://www.masterloc...s_keyways.shtml

look here.
Bump it to the next level.

#5 Customer Support

Customer Support

    Administrator

  • Administrators
  • 753 posts

Posted 19 April 2007 - 08:08 PM

http://www.masterloc...s_keyways.shtml

look here.


BOOKMARKED - thank you! :drinking:

James K. - Lead Support
For Order specific questions please use the 'contact us' link at the top of our store.


#6 tdives

tdives

    Junior Member

  • Members
  • Pip
  • 2 posts

Posted 20 April 2007 - 01:59 AM

Thanks guys for the reply s, yes its a 27 k blank, 5 pin I believe, I guess I will go to the store and try to pick up a blank and start filing. :brickwall:

#7 BLK

BLK

    Pure Genius

  • Members
  • 321 posts

Posted 20 April 2007 - 04:58 AM

just get a couple of copies made so that you have the correct spacing already 'installed' on the blank. That way all you have to do is file straight down below the lowest cut. Then you should be able to bump the original lock.
Bump it to the next level.

#8 Chucklz

Chucklz

    Junior Member

  • Members
  • PipPip
  • 13 posts

Posted 01 May 2007 - 10:42 PM

The No.21 lock has a removable core. While many times the core has an M1 keyway, because it is infact removeable any of the suitable Master keyways may be encountered. Why not just pick it, it's not particularly challenging.