*Bump Keys are ON SALE*
Buy a Bump Key now and start opening locks.
Page 1 of 1
Glossary Of Terms - USA
#1
Posted 25 October 2006 - 06:32 AM
"Valleys" are called cuts.
"Slopes" of the cuts are called ramps.
Ramp on head side of cut is called entry ramp.
Ramp on tip side of cut is called exit ramp.
Angle of ramp is called cut angle.
I am unsure if these terms used in USA but will attempt to follow up.
"Slopes" of the cuts are called ramps.
Ramp on head side of cut is called entry ramp.
Ramp on tip side of cut is called exit ramp.
Angle of ramp is called cut angle.
I am unsure if these terms used in USA but will attempt to follow up.
BUYING A BUMP KEY IS EASY!
Buy a Bump Key now and start opening locks.
#2
Posted 29 October 2006 - 04:47 AM
Everyone should read this.
http://www.thelockman.com/gloscopy.htm
I have no connection with this site.
http://www.thelockman.com/gloscopy.htm
I have no connection with this site.
#3
Posted 20 November 2006 - 01:40 AM
I figured I would give this a little friendly bump, as it has alot of useful information on it
#4
Posted 20 November 2006 - 02:26 AM
Yes,
I've just re-read over it and alot of good info.
Actually, thanks for the bump!
I've just re-read over it and alot of good info.
Actually, thanks for the bump!
#5
Posted 20 November 2006 - 02:27 AM
i think this should really be a sticky, because i think its a good place for ppl to start...
I never quit.... i wanna keep improving in everything i do in life... little by little everyday... i improve my skills...
#6
Posted 04 December 2006 - 03:29 AM
Akina1021 said:
i think this should really be a sticky, because i think its a good place for ppl to start...
i was thinking the same thing .thanks for the info, I'm reading this now!
#8
Posted 04 December 2006 - 04:07 AM
Ah, I found this very helpful! I recommend all newbies read it.
#10
Posted 01 April 2008 - 08:53 PM
Nice job with the info. Thanks.
Step up to the next level of Bumping.
Are you ready?
Are you ready?
Share this topic:
Page 1 of 1

Help


Promote to Article












