Jump to content


Make Bump Key

Posted by Customer Support , 29 October 2009 · 701 views

If you're the type of person that likes to make their own tools, keys, and non-destructive entry devices we've got the best guide available to assist you in your quest.

Here we'll provide a brief rundown of steps we think will help you make a bump key. This is in no way the definitive guide, which is available on our website.

For starters, have a look at the http://www.bumpkeybook.combook product page to get an idea of how to make and actually use a bump key.

Next, have a look at the FAQ in our official forums. If you have a question, chances are it's already been asked and answered. The most common questions are answered in the bump key questions forum.

The next step, definitely is to ensure you've got proper tools and keys; you'll want the proper files and uncut bump keys. The uncut bump keys can be found at our key bumping under 'uncut bump keys'. While we don't offer the files on our site, these can easily be bought at a local hardware store (home depot, lowes, ace, etc.).

Once you've rounded up all the files and uncut bump keys, you'll need to actually follow our bump key guide to figure out where and how deep to make the cuts into the key.

With a bit of practice, following our guide, using the proper tools, and MORE PRACTICE you will be making and using bump keys in no time. The only thing holding you back is... you.